Parts Identification; How To Use - Panasonic Nanoe X F-GPT01M Operating Instructions Manual

PARTS IDENTIFICATION

Front
Main air outlet
(nanoe TM X
emission outlet)
Main unit
Control panel
USB power cord
power cord
USB plug

HOW TO USE

1
Connect the USB power cord to the product.
1
Slightly press the recess
of the filter with your
finger, and remove the
filter in the direction
shown in the figure.
Remove the filter
6
Control panel
"Power Off/On" button
Plug for connecting
the main unit
2
Insert the USB power
cord into the socket
as shown in the figure.
Route the wire
along the groove.
Back
Filter(air inlet)
Operation
indicator
Be sure to use the included
USB power cord.
(Otherwise, electric shock or fire
may be caused.)
Holes
(2 place)
USB socket for
connecting the product
Ø66
WARNING
Push the filter into the main
3
unit in the direction shown
in the figure until it clicks
into place. (Do not let the
USB power cord get pinched
when installing the filter.)
Protrusions (2 place)
Pass the USB power
cord through here.
Unit: mm