Main Parts Identification - Panasonic F-PXV55M Operating Instructions Manual

MAIN PARTS IDENTIFICATION

Front
Odor sensor
Handle
(left and right)
Air inlet
(both sides)
Power cord
Power plug
Dirt sensor and Odor sensor
Dirt sensor can detect air pollutants such as
PM2.5(0.7 ~ 2.5 µm particles), etc. Odor senor
can detect odor such as smoke, etc.The sensitivi-
ty of sensor can be adjusted. (P.13)
Control panel
Filter replacement
indicator
Child lock button/
indicator
Filter replacement indicator
The indicator lights on indicates you need
to replace HEPA composite filter. (P.12)
nanoe X indicator
TM
The indicator lights on indicates nanoe
being generated. nanoe
in all operation modes except you switch off
it. ( P.12).
6
Control panel
Dirt sensor
PM2.5 pollution
indicator
Timer button/
indicator
TM X will be generated
Back
Clean sign
Front panel
Air inlet
(front)
Clean sign
Show the air pollution levels detected by dirt
sensor and odor sensor. The clean sign can be
turned off (P.14) .
Econavi button/
indicator
PM2.5 button/ Air volume button/
indicator indicator
PM2.5 pollution indicator
The indicator lights on indicates PM2.5 pollu-
tion reaches a certain level. You can use PM2.5
mode at this moment to remove PM2.5 quickly.
(P.10)
TM X is
Light sensor
Detects the indoor brightness by the light
sensor, the product can automatically adjust the
brightness of indicators and the air volume.
After you go to bed, it becomes dark in the
room, then the product will switch to the "Sleep
Mode Auto Operation". (P.14)
Air outlet (nanoe TM X emission outlet)
Louver
Blue: indicates clean
Red (small): indicates slight dirty
Red (large): indicates dirty
nanoe TM X indicator
Power Off/On
button
Light sensor