Control Panel And Menu Overview - Zeiss OPMI PROergo S7 Instructions For Use Manual

Device overview

Control panel and menu overview

4
Page 116
The control panel consists of a graphic display (1) with control keys (3).
All functions can be interactively controlled via menus. The display shows
the selected functions and settings. Using control buttons (3) you can move
through the menus and activate a selection field. The field activated is then
highlighted by a dark background. Press Enter button (4) to confirm your
selection or entry.
For entering, briefly press any of control buttons (3). In some settings,
the control buttons have a repeat function, i.e. constant pressing of a button
causes the command to be repeated.
The menus are clearly laid out and user-friendly. The name of the menu is
given in bar (2) at the bottom. At the right-hand end of the bar, a small
pictogram is shown for quick orientation. At the left-hand end of the bar,
the activation field (OK) is located. If the background of this field is dark,
press the "Enter" button to confirm your entry.
The following diagram depicts how the menus are linked.
Power switch (5)
For switching the system on and off. When the system has been switched on,
the green lamp in the switch is lit.
The power switch contains an automatic circuit breaker. If a short circuit
occurs, the automatic circuit breaker will respond and switch the system off.
S7 / OPMI PROergo
1
2
3
5
Version 11.0
G-30-1435-en