Package Contents Stacking Washer Bracket Mount Ball Mount Washer Mount Arm Rotation Collar Universal Ball Mount Supported Products The Quick Mount is compatible with the GigaBeam™, LTU™ Lite, NanoBeam®, NanoStation®, NanoStationloco, and UniFi® Building-to-Building Bridge. NBE-2AC-13, NBE-M5-16, UBB, or GBE using the Universal Ball Mount •...
Part of the Quick-Mount assembly that stabilizes NBE-2AC-13, NBE-M5-19, NBE-M5-16, UBB, the base of the Mount Arm. or GBE. Bracket Mount Mount Arm Adjustable mount compatible with a variety of Used when installing the loco5AC, NS-5AC, Ubiquiti CPE devices. or LTU-Lite.
Page 4
Models NBE-2AC-13 • NBE-M5-16 • • • Components Note: The device’s Lock Ring will also be used.
Page 5
Models NBE-5AC-Gen2 • NBE-M5-19 • Components Note: The device’s Lock Ring will also be used.
Installation Before You Begin Insert the Mount Arm into the Rotation Collar and press until it is locked in. Note: The screw end should extend past the Rotation Collar for installation, as shown below.
Specifications Quick-Mount Dimensions 104 x 122 x 81 mm (4.09 x 4.80 x 3.19") Weight 375 g (0.83 lb) Device Support Ball Mount Assembly loco5AC, NS-5AC, or LTU-Lite • Universal Ball Mount • Universal Ball Mount with NBE-2AC-13, NBE-M5-16, UBB, or GBE •...