Page 1
CKG2RM Quick Start Guide Package Contents UCK G2 Rackmount Accessory System Requirements UniFi Cloud Key G2 or Cloud Key G2 Plus Standard 19" Server Rack Hardware Overview Front Panel Note: This section provides an overview of the front panel as it would function with a Cloud Key installed in the Docking Bay. White Ready for configuration Flashing White Initializing Firmware upgrade in progress. Device is busy; do Heartbeat Flashing White not touch or unplug it.
Blue Device ready for use Flashing Blue Shutting down Device failure; refer to the display for more Rapid Flashing Blue information. Slow Flashing Blue User connected to device Repeating Off/White/Blue Recovery mode Ethernet Port Connects to a DHCP server on your LAN. Power can be provided by an 802.3af PoE switch, such as the UniFi PoE Switch. Reset Button The Reset button serves two functions: Restart Press and release the Reset button quickly to restart the Cloud Key. Restore to Factory Default Settings Press and hold the Reset button for more than five seconds to restore factory default settings to the Cloud Key. Back Panel Lock Tab Mechanism that allows you to adjust the size of the Docking Bay depending on which Cloud Key you are using: UCKG2 or UCKG2PLUS. Docking Bay Interface where the Cloud Key connects to the rackmount. Hardware Installation 1. ...
Page 5
2. Warning: To prevent creating a loop or other unfavorable behavior on the network, only one Ethernet connection should be used. Do not use the Ethernet ports on the Cloud Key G2 and Rackmount Accessory simultaneously. Connecting the Cloud Key G2 Plus 1. 2. 3. ...
Warning: To prevent creating a loop or other unfavorable behavior on the network, only one Ethernet connection should be used. Do not use the Ethernet ports on the Cloud Key G2 Plus and Rackmount Accessory simultaneously. Specifications CKG2RM Dimensions 27.10 x 46.80 x 119.75 mm (1.07 x 1.84 x 4.71") Weight 172 g (6.07 oz) Enclosure Aluminum Management Interface UniFi Networking Interface (1) 10/100/1000 Ethernet Port Buttons (1) Reset to Defaults Power Power Method 802.3af PoE DC 5V, 1A Power Supply 802.3af PoE or USBC 5V, Minimum 1A Max. Power Consumption Operating Temperature 0 to 35° C (32 to 104° F)
CKG2RM Operating Humidity 20 to 80% Noncondensing Certifications CE, FCC, IC Safety Notices 1. Read, follow, and keep these instructions. 2. Heed all warnings. 3. Only use attachments/accessories specified by the manufacturer. WARNING: Do not use this product in location that can be submerged by water. WARNING: Avoid using this product during an electrical storm. There may be a remote risk of electric shock from lightning. Electrical Safety Information 1. Compliance is required with respect to voltage, frequency, and current requirements indicated on the manufacturer’s label. Connection to a different power source than those specified may result in improper operation, damage to the equipment or pose a fire hazard if the limitations are not followed. 2. There are no operator serviceable parts inside this equipment. Service should be provided only by a qualified service technician. Limited Warranty ui.com/support/warranty The limited warranty requires the use of arbitration to resolve disputes on an individual basis, and, where applicable, specify arbitration instead of jury trials or class actions. Compliance Battery Warning 1. Do not expose cells or batteries to heat or fire. Avoid storage in direct sunlight. 2. Do not use any cell or battery which is not designed for use with the equipment. 3. Always purchase the battery recommended by the device manufacturer for the equipment. 4. Secondary cells and batteries need to be charged before use. Always use the correct charger and refer to the manufacturer’s instructions or equipment manual for proper charging instructions. Australia and New Zealand Warning: This equipment is compliant with Class A of CISPR 32. In a residential environment this equipment may cause radio interference.