Page 1
CKG2-RM Quick Start Guide Package Contents UCK G2 Rackmount Accessory System Requirements UniFi Cloud Key G2 or Cloud Key G2 Plus Standard 19" Server Rack Hardware Overview Front Panel Note: This section provides an overview of the front panel as it would function with a Cloud Key installed in the Docking Bay. White Ready for configuration Flashing White Initializing Firmware upgrade in progress. Device is busy; do not Heartbeat Flashing White touch or unplug it. Blue Device ready for use Flashing Blue Shutting down Device failure; refer to the display for more Rapid Flashing Blue information. Slow Flashing Blue User connected to device Repeating Off/White/Blue Recovery mode Ethernet Port Connects to a DHCP server on your LAN. Power can be provided by an 802.3af PoE switch, such as the UniFi PoE Switch. Reset Button The Reset button serves two functions:...
Restart Press and release the Reset button quickly to restart the Cloud Key. Restore to Factory Default Settings Press and hold the Reset button for more than five seconds to restore factory default settings to the Cloud Key. Back Panel Lock Tab Mechanism that allows you to adjust the size of the Docking Bay depending on which Cloud Key you are using: UCK-G2 or UCK-G2-PLUS. Docking Bay Interface where the Cloud Key connects to the rackmount. Hardware Installation 1.
Page 4
Connecting the Cloud Key G2 Warning: To prevent creating a loop or other unfavorable behavior on the network, only one Ethernet connection should be used. Do not use the Ethernet ports on the Cloud Key G2 and Rackmount Accessory simultaneously. Connecting the Cloud Key G2 Plus...
Warning: To prevent creating a loop or other unfavorable behavior on the network, only one Ethernet connection should be used. Do not use the Ethernet ports on the Cloud Key G2 Plus and Rackmount Accessory simultaneously. Specifications CKG2-RM Dimensions 27.10 x 46.80 x 119.75 mm (1.07 x 1.84 x 4.71") Weight 172 g (6.07 oz) Enclosure Aluminum Management Interface UniFi Networking Interface (1) 10/100/1000 Ethernet Port Buttons (1) Reset to Defaults Power Power Method 802.3af PoE DC 5V, 1A Power Supply 802.3af PoE or USB-C 5V, Minimum 1A Max. Power Consumption Operating Temperature 0 to 35° C (32 to 104° F) Operating Humidity 20 to 80% Noncondensing Certifications CE, FCC, IC Safety Notices 1. Read, follow, and keep these instructions. 2. Heed all warnings. 3. Only use attachments/accessories specified by the manufacturer.