NanoBracket™ is ingenious mounting kit that
enables simple, safe and fast installation of
NanoStation™ an other devices on wall or pole.
Holder for NanoStation
NanoBracket is a holder developed especially for the
popular Wireless CPE NanoStation from Ubiquiti Networks,
StationBox from RF elements and wide range of other
devices. NanoBracket holder enables installation of the
NanoStation on wall or pole. It is possible to set the device
to any direction in 90° range by using NanoBracket. This
possibility is enabled by ball hinge. NanoBracket is made
of the highest quality UV stabilized durable ABS plastic. Its
material and color match perfectly with the NanoStation
and StationBox, therefore the device and the NanoBracket
look like one entity after mounting.
NanoBracket™ Universal contains
1
1 Body A
2 Body B
3 U-bolt
4 Ball hinge
5 Base
Suitable for:
6 Holder
UBNT NanoStation M5™
UBNT NanoStation M2™
Screws
UBNT NanoStation™ 5
Nuts
UBNT NanoStation™ 2
AirLive
Saddles
AirLive
Wall plugs
TP-LINK
TP-LINK
RF elements™ StationBox™
Trademarks
Ubiquiti Networks, NanoStation™, Nanostation Loco™, NanoStation M™ and NanoStation Loco M™
are trademarks of Ubiquiti Networks, 91E. Tasman Drive, San Jose, CA 95134, USA
®
AirLive
is registered trademark of OvisLink Corp., 5F, NO.96, Min-Chuan Rd., Hsin-Tsin, 231, Taiwan
RF elements™ and StationBox™ are trademarks of RF elements s.r.o., Chemlonska 1, 066 03 Humenne, Slovakia
®
TP-Link
is registered trademark of TP-LINK Technologies CO., LTD., South Building, No.5 Keyuan Road, Central Zone,
Science & Technology Park, 518057 Nanshan, Shenzhen, P. R. China
www.nanobracket.info
®
Airmax 5
®
Airmax 2
®
TL-WA7510N
®
TL-WA5210G
2
Suitable for:
UBNT NanoStation 5 LOCO™
UBNT NanoStation 2 LOCO™
UBNT NanoStation Loco M5™
UBNT NanoStation Loco M2™
StationBox™ Mikro
3
4
5
6