Installation Of The Appliance - Westinghouse WVE915DSCA User Manual

INSTALLATION
(continued)
Underbench installation
Your underbench oven looks best when the control
panel is directly under the benchtop. An upper infill
panel may be added if the cooktop placed above the
benchtop is too deep.
Oven dimensions
895mm
8

INSTALLATION OF THE APPLIANCE

Vertical cabinet installation
The oven can be built into a vertical cabinet in the
same manner as an underbench. The required cavity
dimensions are the same and the product is secured
to the cabinet in the same way.
572mm
552mm
INSTALLATION
(continued)
Cabinet construction for built in oven
For the best integration within a kitchen, install this
appliance in a cupboard that gives a flush fit with the
surrounding cupboard fronts. A recess of 20mm is ideal.
NOTE: Your appliance must be mounted on a horizontal
surface for the full width and depth of the product.
NOTE: A ventilation slot 20mm wide is required at the
rear of the base of the cabinet floor.
900mm
cupboard
door
876mm
Mounting holes
NOTE: If a powerpoint is fitted it must be accessible with
the appliance installed.
20mm
20mm
(see NOTE)
100mm
max.
Infill panel max.
16mm thickness
900mm
*20mm
see note
below
20mm
slot
580mm
*Refer to cooktop installation instructions for
required clearance between cooktop and oven.
INSTALLATION OF THE APPLIANCE
9