Child Lock; Maintenance / Cleaning - Silvercrest SIKP 2000 C1 Manual

Child lock

The induction hotplate has a child lock so that the settings cannot be changed accidentally.
How to activate or deactivate the child lock:
1. Press the button (10) once. An acoustic signal can be heard and the indicator (11) lights up. The
child lock is now activated.
2. Press and hold the
(11) light goes out. The child lock is now deactivated again. You can use the hotplate as normal.
You can also activate the child lock when the induction hotplate is switched off.

Maintenance / cleaning

In order to avoid burning food residues, clean the hotplate after every use.
Risk of burns!
Wait until the heating zone is completely cool before cleaning it. Otherwise you could get
burnt.
Risk of electric shock!

Always remove the mains plug from the socket before cleaning. Failure to do so could
cause an electric shock.

Do not poor or spray liquids onto the induction hotplate or through the ventilation slots.
This could cause short circuits which could cause electric shocks or burns.
Warning about property damage
Do not use abrasive or astringent detergents or tools which could scratch the surface. These
could damage the hotplate.
Clean the side surfaces and the mains cable with a slightly damp cloth.
Dirt and burnt-on food residues on the surface of the heating zone can be cleaned off using a scraper for
glass hotplates and an appropriate detergent.
button (10) for 3 seconds. An acoustic signal can be heard and the indicator
SilverCrest SIKP 2000 C1
English - 59