Table of Contents
Advertisement
Cleaning
Procedure
•
Disconnect, remove and clean fan separately, if possible.
•
Remove all visible fluff with the vacuum cleaner.
•
Check whether the vanes on the heat sinks and heat pipes are free of contamination.
•
Subsequently remove any loose remains with the vacuum cleaner.
•
Reinstall fan after cleaning.
•
Reinstall air duct.
•
Close side panel.
•
Plug in power supply.
•
Switch on, boot, and test the system.
Siemens
Medical Solutions
TD00-400.840.10.03.02
02.08
Page 29 of 32
CS SD SP/CO
29
6.2
R630/R640; M440/M450
Advertisement
Table of Contents
