Products Description; Installation And Connection - Carbest CD Series Owner's Manual

3. Products Description

CD series solar charge controller protects the battery from being overcharged
by the solar array and from being deep discharged by the loads. The charging
characteristics include serveral stages which include automatic adaption to the
ambient temperature and 12/24 V auto. switch model selectable.

4. Installation and Connection

The controller is intend for indoor use only. Protect it from direct sunlight and
place it in a dry environment. Never install it in humid rooms ( like bathrooms ).
The controller measures the ambient temperature to determine the charging
voltage. Controller and battery must be installed in the same room.
The controller warms up during operation and should therefore be installed on
a nonflammable surface only.
4.1 Mounting
Note : Connect the controller by following the steps described below to avoid
installation errors.
4.1.1 Screw mounting
Mount the controller on the wall with screws that fit to the wall material. Use
screws with 3.5 mm shaft and max. 8 mm head diameter, no counter sunk. ( As
below pictures )
Note: Mind that the screws have carry also the force applied by the wiring.
Make sure that the ventilator slits on the sides are unobstructed.
16