Carbest CD Series Owner's Manual page 18

4.3 Solar array and Controller Connecting
Please note that the solar panels total power should no more than the control-
ler's rate power ( voltage*Amper - V*A ) !
4.4 Load and the Controller Connecting
18
Connect the wires leading to the solar array
with correct polarity. To avoid any voltage
on the wires, first connect the controller,
then the solar array. Mind the recommen-
ded wire size:
10A : min 6mm
12A : min 6 mm
15A : min 8 mm
Attention :
Please positive and negative wire close to
each other to minimize electromagnetic
effects.
Solar panel provide voltage as soon as
exposed to sunlight. Mind the solar panel
manufacturer's recommendations in any
case.
Connect te wires leading to the loads with
correct polarity. To avoid any voltage on the
wires, first connect the wire to load, then to
the controller. Mind the the recommended
wire size :
10A : min 6mm
12A : min 6 mm
15A : min 8 mm
2
2
2
2
2
2