Advertisement
• Insufficient Charge Warning Function
• Quick Start Function
The watch will stop if it is completely discharged.
It will begin to operate soon after (within 10 second) it is exposed to light. (However,
the time to start may vary according to the brightness of the light.)
• Time Setting Warning Function
• Overcharging Prevention Function
Once the secondary battery is fully recharged, the overcharging prevention feature comes
into operation and prevents overcharging.
Return to Table of Contents
The second hand changes to two-second-
interval movement to indicate
insufficient recharging.
Even in such a case, the watch keeps
correct time, but about 1 week after two-
second-interval movement begins, the
watch will stop.
After exposing the watch to light,
recharging takes place and the watch
returns to one-second-interval movement.
If the watch stops, subsequent exposure to light
allows the 'quick start' function to start
again, and the second hand moves with a hitch to
indicate that the time incorrect.
In this case, quickly recharge the watch and
reset the time.
Even if the secondary battery is fully
recharged, the hitch movement will continue,
unless the time is reset and the crown is
returned to the normal position
Return to Table of Contents
Advertisement
