Niigata seiki DHG-35M Instruction Manual

PROFESSIONAL
DIGITAL S-LINE HEIGHT GAUGE
Precision Measuring Instrument
Thank you for purchasing the DIGITAL S-LINE HEIGHT GAUGE.
This precision measuring instrument is for use on a surface plate to measure the height of a feature, or to scribe a workpiece.
●
For safe and proper use, please read this instruction manual before
use and follow the procedures described.
Please keep manual where it is accessible to user for future reference.
●
Keep this manual with the instrument if transferred or leased to a third party.
●
For inquiries about this product, please contact the dealer where
purchased, or Niigata Seiki.
■PARTS ID & FUNCTION
① Post
③ Fine Adjust Car.
⑯ Fine Adjust
⑤Fine Adj. Lock Scr.
Feed Screw
⑦ Slide Clamp
⑮ Data Output Port
⑨ LCD Display
⑩ ON/0-ABS Button
⑥
⑪ Lock Button
Slide
Handwheel
②Slide
PR/SET PR Btn.
⑫
⑧ Battery Cover
⑬ Scribe
④ Base Ref. Surface
Clamp Screw
⑱
Scribe
Clamp
⑰ Jaw
⑭ Scribe（ w/ Carbide Tip ） ⑲ Base
SAFETY NOTICES
Please Observe
To prevent harm to yourself or others, and to prevent damage to property,
always follow the procedures marked by the following symbols.
Denotes a prohibition Denotes a requirement
– You MUST NOT do. – You MUST do.
Indicates risk of personal injury
WARNING:
or property damage if not followed.
Read the manual and follow the directions.
・Use of product other than as described in this manual
may cause accident.
Use only for measuring and scribe work.
・
Use for any other purpose may damage or wear the
instrument. Improper use may also cause accident.
Handle with care.
・Do not drop or subject instrument to excessive shock.
Do not place under heavy objects. Improper handling
may cause damage or poor accuracy.
・
Do not scratch instrument surfaces.
・
Before use, clean the surface plate, Base underside, and
Scribe Measurement Surface with a wipe or soft cloth.
●
c u
「 」
Long ：
●
R S R u
e ea ure e Scree
「 」
：
「 」
Long ：
PR
e u Scree
「 」
：
「 」
Long ：
PR
「 」 「 」
Long ：Set the
.
※
■
era e e u ee
① u
e S e a e er f r ar u c
e e e u c Scre .
②
e Scr e ear e e re
e e e u c Scre .
③
ur e e u ee Scre a e f
a u e e Scr e .
③
⑯
⑤
⑥
⑦
⑭
Instruction Manual
Model
No.
SAFETY NOTICES
- RISK OF PERSONAL INJURY OR
PROPERTY DAMAGE if not followed.
- PROHIBITED action.
- REQUIRED step or necessary condition.
①
Post · · · · · · · · · · · · · · · · · · · · · · Supports the Slide and Display.
②
Slide · · · · · · · · · · · · · · · · · · · · · · Moves up and down with Display.
③
Fine Adjust Carriage · · · · · For precise control of Slide position.
④
Base Reference Surface · · · Measurements are to this surface.
⑤
Tighten when using Fine Adjust Feed.
Fine Adjust Lock Screw · · ·
⑥
Slide Handwheel · · · · · · · · · · For moving the Slide.
⑦
Slide Clamp · · · · · · · · · · · · · · · Locks Slide position.
⑧
Battery Cover · · · · · · · · · · · · · Open to access Battery.
⑨
LCD Display · · · · · · · · · · · · · · · Digital display of measurement.
⑩
Power ON/OFF; set measurement to zero.
[ON/0-ABS] Button · · · · · · · ·
⑪
Lock Button · · · · · · · · · · · · Disables button operation.
⑫
Set and recall the Preset Value.
[PR/SET PR] Button · · · · · ·
⑬
Scribe Clamp Screw · · · · · · Tighten to secure the Scribe.
⑭
Scribe (w/ Carbide Tip) · · · · Measurement tip, or to scribe workpiece.
⑮
Data Output Port · · · · · · · · · · Data Transfer Cable connects here.
⑯
Fine Adjust Feed · · · · · · · · · · Turn for fine adjustment.
⑰
Scribe mounts here.
Jaw · · · · · · · · · · · · · · · · · · · · · · · · ·
⑱
Scribe Clamp · · · · · · · · · · · · · · Secures the Scribe.
⑲
Base · · · · · · · · · · · · · · · · · · · · · · · Supports the Height Gauge.
Use and store only in environment meeting the following
conditions:
● Dry and protected from rain, water, and oils.
● Protected from direct sunlight.
●
Location that is not excessively hot.
●
Not subject strong electric or magnetic fields.
●
Protected from children and unauthorized users.
・
Use in places contrary to the above may cause damage to
the product or affect accuracy resulting in accident or injury.
Remove Battery from gauge when it will not be used for
an extended period.
・Battery may leak if unused for a long time.
Scribe tip is sharp; handle with care.
・It may cause injury.
Do not disassemble or modify.
・Disassembly may damage product or cause accident.
For repair, please contact distributor or place of purchase.
Do not write on instrument with electric engraver.
・Do not engrave instrument, such as an ID number, with
engraver or electric pen.
Do not clean main body with organic solvents.
・It may damage product and affect accuracy.
■
u e ea ure e
① ur
er .
② u
e S e a e er u a
e S e e e e u
③
e S e a e a
e Scr e c ac e Surface
re e R S R u
e . .
※
.
Se e Scr e e ec e
a ea ure e .
.
⑦ S
⑥
⑦
⑥
※
⑭
ea . Surface
Ref. Surface
Surface a e
e S e
■
a
ara e ea ure e
① ur
e
er .
② u
e S e a e er u a
e S e e e e u
③ Se
e Scr e e Refere ce Surface a
e S u e
「 . 」 .
「 」 .
ea ure e ec r urface
DHG-35M
①
e r
DHG-60M
er c u er c c
②
er R
CR2032 （
・
・
...
re
re ...
■
er
※
１ ２
■ Mounting a Dial Indicator
A dial Indicator (sold separately) can be mounted in place of the
Scribe using an optional Indicator Mounting Arm (also sold
f r ar u c separately.)
c Scre .
On the Indicator Mounting Arm, loosen the Clamp and
insert the Indicator into the mounting hole and secure
e u ee r
by tightening the Clamp.
a e.
loosen the Scribe Clamp Screw and remove from the
e e ea ure e
Jaw.
Insert the Mounting Arm into the Scribe Clamp replace
onto the Jaw. Adjust the amount of overhang, and
tighten the Scribe Clamp Screw to secure.
ea ure a a e
Re ea e
c
e a e ecure
■ Data Output
ur a e u e
S e a ee .
Connect the optional Data Transfer Cable (DTC-M1) to output
data. To send data, connect the cable and press the Data Button
on the cable.
⑲ Connecting the Data Transfer Cable
Using a small screwdriver, remove the Cover and attach the
cable.
Cover
f r ar u c
c Scre .
・For communication details, please refer to the manual for
re
the 『SK-LOG Measuring Instrument Communication
e ea ure e
Software』 , sold separately.
e ea ure .
TROUBLESHOOTING
Error Condition
Error is displayed on
the LCD.
３ ４
■
R
・
・
e a er r a e e a er
e re e.
①
Scr e.
⑬
⑱ S
u a er .
②
（＋）
fac
a
Scre
）
S
■ u
●
「
「 Long
e 『 』
「
「
Long
「 Long
●After use, clean measuring surfaces, sliding surfaces, base,
and exterior using a dry cloth and perform rust prevention
treatment.
For rust prevention, lightly apply anti-rust oil.
●Remove battery if instrument will not be used for a long period
of time.
Model No.
Meas. Range
Dial Indicator
Resolution
⑬ Scribe Clamp Screw
Max. Permissible Error
Display
Mass
Indicator Clamp
Op. Temp. Range
Power
Accessories
⑰ Jaw
⑱ Scribe Clamp
Indicator Mounting Arm
APPLICATIONS FEATURES
●
Measuring and marking workpieces, ideal for tool and die work.
●
Handwheel for smooth operation.
●
Digital display for easy reading.
●
Zero point can be set at any position.
●
Preset Value can be set and stored.
●
Auto-off function (Settable to 8, 120 min., disabled)
SERVICE
●
If Instrument is not working properly, or if you have any
Data Transfer Cable
questions, please contact distributor or place of purchase.
●
Please note, manufacturer is unable to respond to inquires
Data Button
or provide service directly. Please contact distributor or place
of purchase.
To maintain instrument accuracy, periodic calibration is recommended.
Corrective Action
The Slide was moved too fast;
press the [ON/0-ABS] Button and
retake the measurement.
a e Scr e
e e Scr e a Scre a re e
⑰
⑭ S
er e Scr e e Scr e a e
u a re ace e a . u
u f er a a e e Scr e a
ecure.
⑰
⑭ S
⑱ S
u er a
era
S u
」
：
.
REL
」 ：
.
」
.
」
」
.
「dir 1」 ：
「dir -1」 ：
AFTER USE STORAGE
SPECIFICATIONS
DHG-35M DHG-60M
0−350mm 0−600mm
0.01mm
±0.04mm ±0.05mm
5 digit LCD
~7㎏ ~8㎏
10〜40℃
CR2032（lithium battery）
・Instruction Manual ・CR2032
・Battery Tool （lithium battery）
※ for test
Calibration interval necessary to maintain accuracy will vary depending on frequency
and conditions of use. Please follow your company's guidelines and calibrate regularly.
Outside Japan,
Please contact distributor or place of purchase to inquire about calibration services.
Niigata Seiki Co., Ltd.
5-3-14, Tsukanome, Sanjo, Niigata, Japan, 955-0055
Tel. : +81-256-33-5522 Fax. : +81-256-33-5518
MAIL intl.sales@niigataseiki.co.jp
URL http://www.niigataseiki.co.jp
●
「
L
e
●
「
「
L
e
「
「
L
「
L
■
①
②
③
.
D
●
●
●