Advanced Commands: (Level 2); Sensor Bypass; Remote Valet - Automate 5304A Owner's Manual

Advanced Commands: (Level 2)

Press and release the

Sensor Bypass

Press and release
The parking lights flash each time this command is received to indicate
the Sensor bypass type. Repeat this command to incrementally bypass
sensor operations.
2 flashes indicates sensor Warn-away zones are bypassed.
BYPASS WARN
3 flashes indicates sensor Warn-away and Full Trigger zones
are bypassed.
to confirm.
1 flash indicates sensor bypass is Off,
1beep play to confirm.
Note
System needs to be armed to perform Sensor Bypass.
Perform arm command any time to turn Sensor Bypass Off.

Remote Valet

Press and release
Enters (or if On, exits) Valet Mode. The
On, 2 for Off) play to confirm and the System Status icons update.
See Valet Mode for more details
18 18
button 2 times.
, 1 beep and 1 fault tone play to confirm.
BYPASS FULL
, 1 beep and 2 fault tone play
text and beeps (1 for
VALET
© 2012 Directed. All rights reserved.
ALL
1
level 2
and
BYPASS OFF