Advanced Commands; Silent Arm; Sensor Bypass - Automate 5204A Owner's Manual

Advanced Commands

Press and release the
by pressing and releasing another command button.

Silent Arm

Press and release
The alarm arms, doors lock (if connected), and the parking lights flash
once. The Arm LED turns on to confirm. Valet mode* or Trigger Zone
Fault Report** messages may be received.
Silent Disarm
Press and release
The alarm disarms, doors unlock (if connected), and the parking lights
flash twice. The Disarm LED turns on to confirm. The Silent Disarm
output may be replaced by the Alarm Report**

Sensor Bypass

At any time while the system is armed, press and release the
button on the remote and then within two seconds, press and hold
the button for one second to enable the sensor bypass mode.
Repeating the previous steps incrementally bypass sensor operations
and are confirmed as follows:
Warn-away bypass: The Parking lights flash 2 times. The Arm
LED, 1 beep and 1 fault tone play to confirm. Sensors will be
activated for Full Trigger levels of impact only.
Warn-away & Full trigger bypass: The Parking lights flash 3
8
once, followed quickly (within 2 seconds)
, then press and release
, then press and release
© 2012 Directed. All rights reserved.