9 Bring up ESR1221N
Connect the supplied power-adapter to the power inlet port and connect it to a
wall outlet. Then, ESR1221N automatically enters the self-test phase. During self-
test phase, Power LED will blink briefly, and then will be lit continuously to
indicate that this product is in normal operation.
10 Smart Wizard
CHECK
•
Internet connection should be setup & ready to use (ADSL or cable modem).
•
Modem must provide an RJ45 port to connect with ESR1221N.
•
Microsoft Windows compatible PC/Notebook with UPnP enabled network
adapter.
•
CAT 5 network cable(s), RJ45 port on PC/Notebook.
STEP 1
Connect ESR1221N WAN port & your modem LAN port with RJ45 cable.
STEP 2
Power up ESR1221N.POWER led on front panel lights up & remains stable.
STEP 3
Connect ESR1221N LAN port & PC/Notebook RJ45 port with network cable.
14