Table of Contents
Advertisement
INTERNET
- Status
This page shows the current Internet connection type and status
- Dynamic IP
Use the MAC address when registering for Internet service, and do not change it
unless required by your ISP. If your ISP used the MAC address of the Ethernet
card as an identifier, connect only the PC with the registered MAC address to the
broadband router and click the <Clone MAC Address> button. This will replace
the current MAC address with the already registered Ethernet card MAC
Host Name: This is optional.
MAC address: The default value is set to the WAN's physical interface of the
broadband router.
address.
34
Advertisement
Table of Contents
