Bring Up Esr-9750; Smart Wizard - EnGenius ESR-9750 User Manual

9 Bring up ESR-9750

Connect the supplied power-adapter to the power inlet port and connect it to a
wall outlet. Then, ESR-9750 automatically enters the self-test phase. During self-
test phase, Power LED will blink briefly, and then will be lit continuously to
indicate that this product is in normal operation.

10 Smart Wizard

CHECK
•
Internet connection should be setup & ready to use (ADSL or cable modem).
•
Modem must provide RJ45 port to connect with ESR-9750.
•
Microsoft Windows compatible PC/Notebook with UPnP enabled network
adapter
•
CAT 5 network cable(s), RJ45 port on PC/Notebook.
STEP 1
Connect ESR-9750 WAN port & your modem WAN port with RJ45 cable.
STEP 2
Power up ESR-9750.POWER led on front panel lights up & remains stable.
STEP 3
Connect ESR-9750 LAN port & PC/Notebook RJ45 port with network cable.
13