Fluke 700BCW Instruction Sheet

How to Contact Fluke
To contact Fluke, call one of the following numbers:
1-800-44-FLUKE (1-800-443-5853) in U.S.A. and Canada
+31 402-678-200 in Europe
+81-3-3434-0181 in Japan
+65-*-276-6196 in Singapore
+1-425-356-5500 in other countries
Visit us on the World Wide Web at:
www.fluke.com
In Case of Difficulty
If you are having trouble reading a bar code, perform the
steps under "Resetting the Wand" in this Instruction Sheet. If
you are unable to reset the wand, or if resetting the wand
does not solve the problem, contact a Fluke Service Center.
Limited Warranty & Limitation of Liability
This Fluke product will be free from defects in material and
workmanship for one year from the date of purchase. This warranty
does not cover fuses, disposable batteries or damage from accident,
neglect, misuse or abnormal conditions of operation or handling.
Resellers are not authorized to extend any other warranty on Fluke's
behalf. To obtain service during the warranty period, send your
defective calibrator to the nearest Fluke Authorized Service Center
with a description of the problem.
THIS WARRANTY IS YOUR ONLY REMEDY. NO OTHER
WARRANTIES, SUCH AS FITNESS FOR A PARTICULAR
PURPOSE, ARE EXPRESSED OR IMPLIED. FLUKE IS NOT
LIABLE FOR ANY SPECIAL, INDIRECT, INCIDENTAL OR
CONSEQUENTIAL DAMAGES OR LOSSES, ARISING FROM ANY
CAUSE OR THEORY. Since some states or countries do not allow
the exclusion or limitation of an implied warranty or of incidental or
consequential damages, this limitation of liability may not apply to
you.
Fluke Corporation
P.O. Box 9090
Everett, WA 98206-9090
U.S.A.
Fluke Europe B.V.
P.O. Box 1186
5602 B.D. Eindhoven
The Netherlands
Fluke-700BCW Bar Code Wand
Fluke-700BCA Bar Code Adapter
Introduction
The Fluke-700BCW Bar Code Wand accessory lets you scan
bar encoded data into the Model 743B Documenting Process
Calibrator. This wand allows you, for example, to enter an
instrument's Tag ID number after you press the Save and
Continue softkeys on the 743B.
The Fluke-700BCA Bar Code Adapter is an adapter cable
that is included with the Fluke-700BCW, or is available
separately if you already own a Hewlett Packard Model
HBSW-8200 SmartWand Bar Code Reader.
The wand and adapter cable plug into the 743B SERIAL
PORT, and transmit the characters encoded in a bar code
label to the 743B.
In its default configuration, the wand automatically
recognizes and decodes the following bar code symbologies:
•
Code 39, Standard or Extended (Full ASCII)
•
Interleaved 2 of 5
•
UPC/EAN/JAN codes, with or without supplementals
•
Code 128
•
Codabar
•
Code 11
•
MSI Code
•
Code 93
PN 606860
August 1997
1997 Fluke Corporation. All rights reserved. Printed in U.S.A.
All product names are trademarks of their respective companies.
®
Instruction Sheet
ns01f.eps