Hardware Setup - Jorjin WG1300-B0 User Manual

Doc No: WG1300BE00 EM Board-UG-R02

2.3. Hardware Setup

Before conducting performance test, EM Board should be connected
to Host platform with mating connectors, J6 and J7. For the case of
using EM mating connector for hardware connection, the mating EM
connector should be lined up and spaced 1.2" apart as Figure 3 below
Figure 3. Host PCB Mating Connector Arrangement
©
Copyright JORJIN TECHNOLOGIES INC. 2014
Page 12
http://WWW.JORJIN.COM.TW
CONFIDENTIAL