Bottom Side - Jorjin WG1300-B0 User Manual

2.2. BOTTOM Side

Figure 2 is BOTTOM-Side picture of WG1300BE00 EM Board.
J7
Figure 2. Bottom Side of WG1300BE00 EM Board
There are two EM Board mating connectors which are used for
connecting to Host platform and mounted on the bottom side as the
picture above. Table 4 and Table 5 show the descriptions on the signals
brought out from these two EM mating connectors.
J6 Pin Pin Name
Number
1 GND
5 EXT_32KHz
10 VBAT_SW_EN
12 WL_SPI_IRQ
Copyright
Module Pin Type
I
I
O
©
JORJIN TECHNOLOGIES INC. 2014
http://WWW.JORJIN.COM.TW
CONFIDENTIAL
Doc No: WG1300BE00 EM Board-UG-R02
J6
Description
Ground
External Slow Clock input from Host
device. It can be used for the SiP
Module inside which hasn't slow clock
source.
Active-high enable signal from Host
device.
Host Interface SPI Interrupt Request
Page 10