Advertisement
Design Features
Rotary Encoder
This knob is for adjusting main volume, zone volumes,
menu navigation and setting adjustments.
MENU button
This button gives you access to the main settings of
the unit by long pressing. Short pressing will give you
access to the settings for the active source.
SRC (Power) Button
This button allows you to switch between
sources (short press) and power the unit ON
and OFF (long press).
SUB Buttons
These buttons allow you to adjust the subwoofer
output or rear line out UP or DOWN (0-20).
PMX-3
PLAY / PAUSE button
Press this button to play or pause your music. This
button also acts as a MUTE when the source is in AUX
& TUNER mode.
4
REV / FWD button
Use this button to skip back and forward through
channels or tracks with a short press. Long
pressing will activate manual seek mode.
DIMMER button
Pressing this button will allow you to select between
the two brightness values for the display.
Fig. 1
Advertisement
