Included In The Box - Uniden Guardian B6440D1 Setup Manual

ABOUT YOUR VIDEO SECURITY SYSTEM
Thank you for purchasing Uniden's Guardian Video Security DVR. This state of the
art surveillance system provides high quality synchronous audio and video. TCP/IP
network technology lets you monitor and operate your system remotely.
This Setup Guide provides basic setup and operation information so you can quickly
get your system up and running. It also sets up remote viewing access. Download
the Owner's Manual from www.uniden.com for detailed information about system
operation.

INCLUDED IN THE BOX:

• Cameras (4, 6, or 8)
• 4-or 8-Way Splitter
Cable
• Ethernet Cable
If any items are missing or damaged, visit www.uniden.com for assistance
SETTING UP YOUR SYSTEM - BASIC
Images in these installation procedures show the front and back panels of the
G6840D1. Other models' back panels will be different, but similar.
Basic setup connects the DVR to all peripheral equipment (cameras, mouse,
monitor, etc) and power. Once connected, your system is ready for use through the
DVR's menu system.
You can set up your system in 2 stages - installing your system hardware and then
setting up basic configuration. Each stage has separate steps.
STAGE 1 - Install System Hardware
• Connect DVR to Power
• Connect Mouse to DVR
• Connect DVR to Monitor
• Connect Ethernet Cable
• Connect Cameras to DVR and Power
• Install Cameras
STAGE 2 - Basic System Configuration
• Complete Wizard and Log In
• Set Password
• Receiver (1)
• 60' Extention Cable (4,
6, or 8)
• HDMI Cable
1
• 12V 2A Power Adapter
(2)
• USB Mouse
• Camera Mounting Kit