Pentair ETi 400 Installation Manual page 9

Propane Conversion Kit Installation Instructions (Continued)
Figure 6.
9. Remove all the tubing from the air orifices and replace the two white AIR ORIFICES
with the new ones provided. Use the 5/16" socket wrench or 5/16" nut driver to
secure in place. Discard the old air orifices. See Figure 7.
Figure 7.
Replace the gas orifices
inside the both unions
with the new ones. Be
sure the letters "NL" are
facing outward. Tighten
the unions with the
channel locks tool.
TIP: REPLACE THE GAS
ORIFICE AND TIGHTEN
ONE UNION AT THE
TIME FOR EASE OF
INSTALLATION.
ETi 400 Heater Fuel Gas Conversion Kit Installation Guide
Remove
tubing attached
to air orifices
and use 5/16"
socket wrench
or nut driver
to remove and
replace the
orifices.
9