Advertisement
FLEX MOUNT
REVERSING CAMERA
Getting Started Guide
1. UNPACK
Unpack the reversing camera from the packaging and check you have
all the components:
• 1 x 5 inch Dash Monitor
• 1 x Wireless IP Rated Camera
• 1 x License Plate Adaptor
Mount with Cable
• 1 x Suction Mount for Monitor
• 1 x 12V/24V Power Adaptor for
Monitor or Camera
• 1 x Monitor Hardwire Cable
(Not Shown)
2. CHARGE
Using the included power adaptor, charge the wireless camera
3. ATTACH MONITOR
Attach the 5" Monitor to the suction mount and place on your dash/
windshield
4. MOUNT CAMERA
Once the camera is charged, place the camera in a suitable position on
the back of your car and power on the camera
5. PLUG IN MONITOR
Connect the power adaptor cable to the monitor to turn it on
6. REVERSE!
• 1 x Installation Kit (Not Shown)
• 1 x Spare Fuse (Not Shown)
• 1 x Instruction Manual (Not
Shown)
• 1 x Warranty Card (Not Shown)
.
• 1 x Getting Started Guide (Not
Shown)
HE170543
PLU: 58512
08/2017
Version 1.1
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Cocoon HE170543
Summary of Contents for Cocoon HE170543
- Page 1 FLEX MOUNT REVERSING CAMERA HE170543 Getting Started Guide PLU: 58512 08/2017 1. UNPACK Unpack the reversing camera from the packaging and check you have all the components: • 1 x 5 inch Dash Monitor • 1 x Installation Kit (Not Shown) •...
- Page 2 Warranty Note If you experience any issues with this product, or it’s performance is not what you had expected, please contact us at Winplus before returning the item to the store. It is likely that we can resolve any problems for you via phone or email.
Need help?
Do you have a question about the HE170543 and is the answer not in the manual?
Questions and answers