Advertisement
1. BEFORE YOU START
Scan this code
or search for
Cocoon Connect
Before you begin, make sure you have:
1. A mobile device - Android (V4.1 or later) or iOS (V8 or later)
2. USB Power going to the Indoor Camera
3. A Wi-Fi connection (have the password handy)
4. Download the Cocoon Connect app
For detailed instructions and videos, visit www.cocoonproducts.com.au
2. App Setup
First time users:
Register an account and follow the remaining prompts on screen
3. Confirm Pairing Mode
INDICATOR
LIGHT
• The LED indicator light will be flashing red
• If you are having issues please refer to your manual
4. Add the CAMERA
2. SELECT SMART
CAMERA (IN SECURITY
& SENSOR)
1. ADD NEW
DEVICE
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Cocoon HE180364
Summary of Contents for Cocoon HE180364
- Page 1 1. A mobile device - Android (V4.1 or later) or iOS (V8 or later) 2. USB Power going to the Indoor Camera 3. A Wi-Fi connection (have the password handy) 4. Download the Cocoon Connect app First time users: • The LED indicator light will be flashing red Register an account and follow the remaining prompts on screen For detailed instructions and videos, visit www.cocoonproducts.com.au...
- Page 2 If you have any issues with this step, ensure your password is correct 2. Camera will beep when the code is scanned Use, manage and control your Smart Indoor Camera from the Cocoon 3. Press ‘Heard the Beep’ If you are still having issues, please check your Instruction Manual...
Need help?
Do you have a question about the HE180364 and is the answer not in the manual?
Questions and answers