Cocoon HE161512 Getting Started Manual

1.

UNPACK

Unpack your Virtual Reality 360º Camera and check that you have received all of the
components:
• 1x Virtual Reality 360º Camera
• 1x Tripod
• 1x USB Charging Cable
• 1x Carry Case
2.

CHARGE THE CAMERA

a. Plug one end of the Charging Cable into the Micro USB Port on the Camera
b. Plug the other end of the Charging Cable to your PC's USB Port
NOTE: Power indicator will turn blue when camera is charging
c. Once the indicator has turned off, your camera is fully charged
NOTE: Please charge camera for 5 hours before first use
3.

INSERT MICRO SD CARD (NOT INCLUDED)

Insert a Micro SD card into the Micro SD Card Slot on the side of the Camera
IMPORTANT NOTE: You must insert a Micro SD Card (up to 64GB - not included) in order to use this
product. Class 6 or Class 10 Recommended
NOTE: Always ensure your Camera is switched off before inserting or ejecting a Micro SD Card
4.

PREPARE YOUR SMARTPHONE

Download and install the Cocoon360 App from the iOS or Google Play App store or
scan the QR code to download the App
5.

CONNECT TO THE CAMERA

a. Press and hold the Power Button for 3 Seconds to turn the camera on
b. Press the Wi-Fi button on the camera to turn Wi-Fi on. The camera name and
password will appear on the LCD screen
c. On your smartphone, go to Wi-Fi settings and connect to the 'Cocoon360_xxx'
wireless network. Enter the password on the camera LCD screen, default
'1234567890'
d. Once connected, open the Cocoon360 app and tap the connect button
view a live stream from the camera
GETTING STARTED GUIDE
• 1x Instruction Manual
• 1x Getting Started Guide
• 1x Warranty Card
to
Model Number: HE161512
PLU: 55406
09/2016
After Sales Support 1300 663 907
www.winplus.com.au