Cocoon HE200073 Instruction Manual

Hide thumbs Also See for HE200073:

1. BEFORE YOU START

Scan this code

or search for

Cocoon Connect

Before you begin, make sure you have:

1. A mobile device - Android (V4.1 or later) or iOS (V8 or later)

2. 2 x Rechargeable batteries installed in the Smart Wireless Camera

3. A Wi-Fi connection (have the password handy)

4. Download the Cocoon Connect app

For detailed instructions and videos, visit www.cocoonproducts.com.au

First time users:

• The LED indicator light will be flashing purple/ blue. The camera

will say 'The camera is now ready to begin pairing'

• If you have issues with this step, hold down the internal reset

button for 5 seconds and start again

• If you are still having issues, please check your instruction manual

2. SELECT WIRELESS

CAMERA

1. ADD NEW

DEVICE

Table of Contents

Do you have a question about the HE200073 and is the answer not in the manual?

Page 1 ‘The camera is now ready to begin pairing’ 3. A Wi-Fi connection (have the password handy) • If you have issues with this step, hold down the internal reset 4. Download the Cocoon Connect app First time users: button for 5 seconds and start again Register an account and follow the remaining prompts on screen •...
Page 2 If you have any issues with this step, ensure your password is correct 2. Camera will beep when the code is scanned Use, manage and control your Smart Wireless Camera from the Cocoon 3. Press ‘Heard the Beep’ If you are still having issues, please check your Instruction Manual...