Canon Super G3 FAX Board-AK1 Service Manual page 49

9) Secure the Modular Cable to the Modular Unit.
• 1 Connector
10) Cut of the area of the Left Rear Cover as shown using side cutter.
Only for EUR
NOTE:
As for the 2nd Line FAX Board-AK1, it is good to install it prior to restoring the
external covers of the host machine.
6
Installation > Installation Procedure Installation
F-6-12
Only for the
other destination
F-6-13
6 Installation > Installation Procedure Installation
11) Return the removed covers to their original positions.
• Controller Box Cover
• Left Rear Cover (2 Claws, 4 Screws; RS-tight)
• Rear Cover (4 Claws, 4 Screws; RS-tight)
6-6
6-6