Canon Super G3 FAX Board-AK1 Service Manual page 48

5) Secure the 2 harnesses of the Fax Unit in place using the 2 Edge Saddles of the Controller
Box, and connect the harnesses to the Controller PCB.
• 2 Connectors, 2 Edge Saddles
x2
x2
6) Secure the Modular Cable to the Fax Unit PCB.
• 1 Connector
6
Installation > Installation Procedure Installation
F-6-8
x1
F-6-9
6 Installation > Installation Procedure Installation
7) Install the Fax Unit Cover.
• 2 Edge Saddles, 3 Screws (TP)
x3
x2
8) Stick the sheet to the Modular Unit, and install the Modular Unit to the Fax Unit.
• 1 Screw (TP)
x1
6-5
F-6-10
F-6-11
6-5