Image Level Selection - Sanyo PLC-XE20 Owner's Manual

Image Level Selection

Direct Operation
Select an image level among Standard, Cinema, Image 1, Image 2,
Image 3, and Image 4 by pressing the IMAGE button on the remote
control.
Standard
Normal picture level preset on this projector.
Cinema
Picture level adjusted for the picture with fine tone.
IMAGE 1~4
User preset image in the Image Adjust Menu (p36, 37).
Menu Operation
1
Press the MENU button and the On-Screen Menu will appear.
Press the Point Left/Right button to move the red frame pointer
to the Image Select Menu icon.
2 Press the Point Down button to move the red frame pointer to
the level that you want to set and then press the SELECT
button.
Standard
Normal picture level preset on this projector.
Cinema
Picture level adjusted for the picture with fine tone.
IMAGE 1~4
User preset image in the Image Adjust Menu (p36, 37).
IMAGE button
Standard
Cinema
Image 1
Image 2
Image 3
Image 4
Image Select Menu
Move the red frame pointer to a level
and press the SELECT button.
The level being selected.
Video Input
Image Select
Menu icon
35