Before Requesting Service - Panasonic NN-GF574M Operating Instructions Manual

Before Requesting Service

The oven causes interference
with my TV.
Steam accumulates on the
oven door and warm air
comes from the oven vents.
I accidentally operate my
microwave oven without any
food in it.
There are humming and
clicking noises from my oven
when I cook by Combination.
The oven has an odor and
generates smoke when
using Combination and Grill
function.
Some smoke will be given off
from the cavity when using
grill or combination for the
first time.
PROBLEM
Oven will not turn on.
Oven will not start cooking.
The " " appears in the
Display Window.
"H00", "H97" or "H98" appears
in the display window.
If it seems there is a problem with the oven, contact an authorized Service Centre.
IP5038_3BN00PT_Eng_12_141029.indd 20 IP5038_3BN00PT_Eng_12_141029.indd 20
ALL THESE THINGS ARE NORMAL:
Some radio and TV interference might occur when you cook with the microwave oven.
This interference is similar to the interference caused by small appliances such as mixers,
vacuums, hair dryers, etc. It does not indicate a problem with your oven.
During cooking, steam and warm air are given off from the food. Most of the steam and
warm air are removed from the oven by the air which circulates in the oven cavity.
However, some steam will condense on cooler surfaces such as inside and/or on the oven
door. This is normal and safe. Steam will disappear after the oven is cool down.
Operating the oven empty for a short time will not damage the oven. However, we do not
recommend this to be done.
These noise occur as using microwave power or Grill. This is normal.
It is essential that your oven is wiped out regularly particularly after cooking by
Combination or Grill. Any fat and grease that builds up on the roof and walls of the oven
will begin to smoke if not cleaned.
It caused by the excessive oil in the cavity and oil used for rust protection.
POSSIBLE CAUSE
The oven is not plugged in
securely.
Circuit breaker or fuse is tripped
or blown.
There is a problem with the outlet.
The door is not closed completely.
Start Pad was not pressed after
programming.
Another program has already been
entered into the oven.
The program has not been
entered correctly.
Stop/Reset Pad has been
pressed accidentally.
The Child Lock was activated by
pressing Start Pad 3 times.
The display indicates a problem with
microwave generation system.
- Eng-20 -
REMEDY
Remove plug from outlet, wait 10 seconds
and re-insert.
Contact the specified service center.
Plug another appliance into the outlet to
check if the outlet is working.
Close the oven door securely.
Press Start Pad.
Press Stop/Reset Pad to cancel the
previous program and program again.
Program again according to the Operating
Instructions.
Program oven again.
Deactivate Lock by pressing Stop/Reset
Pad 3 times.
Contact the specified service centre.
2014-10-29 11:40:35 2014-10-29 11:40:35