Timer Setting (Kitchen Timer/Standing Time/Delay Time) - Panasonic NN-GF574M Operating Instructions Manual

Timer Setting
This feature allows you to program the oven as a kitchen timer. It can be also used to program a stand time after cooking is
completed or to program a delay start.
To use as a Kitchen Timer: Example: To count 5 minutes
1. Press once.
To Set Standing Time: Example: To stand for 5 minutes after cooking
Set the desired
cooking program.
(up to 2 stages)
To Set Delay Time: Example: To start cooking 5 minutes later
1. Press once.
Notes:
1. If oven door is opened while Standing Time, Delay Time or Kitchen Timer has been set, the time in the display window will
continue to count down.
2. Delay Time and Standing Time can not be programmed before any Auto control Function. This is to prevent the standing
temperature of the food from rising before defrosting or cooking begins. A change in the starting temperature could cause in
accurate results.
3. When using Standing time or Delay time, it's up to 2 Power stages.
IP5038_3BN00PT_Eng_12_141029.indd 19 IP5038_3BN00PT_Eng_12_141029.indd 19
(Kitchen Timer/Standing Time/Delay Time)
2. Press 5 times.
Set desired amount of time.
(up to 99 minutes and 50 seconds.)
1. Press once.
5 times
2. Press 5 times.
Set desired amount of
delay time.
(Up to 99 minutes and 50
seconds.)
5 times
5 times
2. Press 5 times.
Set desired amount of
standing time.
(Up to 99 minutes and 50
seconds.)
Set the desired
cooking program.
(up to 2 stages)
- Eng-19 -
3. Press.
Time counts down without
operating oven.
3. Press.
Cooking starts. After
cooking, standing time
will count down without
operating oven.
3. Press.
Delayed time counts
down. After delay time,
cooking will start.
2014-10-29 11:40:35 2014-10-29 11:40:35