Screw list
NOTE:
When removing screws from a component, it is recommended to note the screw type, the quantity of screws, and
then place them in a screw storage box. This is to ensure that the correct number of screws and correct screw type is
restored when the component is replaced.
NOTE:
Some systems have magnetic surfaces. Ensure that the screws are not left attached to such surface when
replacing a component.
NOTE:
Screw color may vary with the configuration ordered.
Table 1. Screw list
Component
Base cover
Solid-state drive
WWAN card
System fan
Heat sink
Display assembly
Screw type
Captive screws
M1.6x2.5
Captive screw
M1.6x2.5
Captive screws
M2.5x3
Quantity
8
1
1
2
3
6
Removing and installing components
Image
N/A
11