Table of Contents
Advertisement
Available languages
Available languages
Setting the total power
Notes
There must not be any cookware on the hob.
■
The hotplates must be switched off.
■
Disconnect the power supply to the appliance.
1.
Reconnect the power supply to the appliance.
2.
Note: You must complete the following steps within two
minutes.
Using the hob
In this section, you can find out how to switch on the hob and
set the hotplates.
Switching the hob on and off.
Switching on
Press and hold the
#
button.
is displayed in the hotplate display panel. The hob is ready
‹
for use.
Switching off
Press and hold the
#
button.
The hob is switched off. The residual heat indicator remains on
until the hotplates have cooled down sufficiently.
Note: The hob switches off automatically if all hotplates have
been switched off for longer than 20 seconds.
Setting up the hotplates
Setting the heat setting
The hob must be switched on.
Press the
μ
button for the required hotplate.
1.
Press the
A
and
@
buttons to set the required heat setting.
2.
Note: Press
A
to set the hotplate to heat setting
exceeds the total power of the hob, the highest possible heat
setting is set.
Changing the heat setting
Press the
μ
button for the required hotplate.
1.
Press the
A
and
@
buttons to change the heat setting.
2.
Switching off the hotplate
Press the
μ
button for the required hotplate.
1.
Press the
A
button until
2.
Powerboost function
The powerboost function enables you to heat up large volumes
of water faster than when using heat setting
Only the two large hotplates have a powerboost function.
Switching on
Press the
μ
button for the required hotplate.
1.
Set the hotplate to heat setting
2.
Press the
button.
@
3.
The powerboost function is switched on.
display panel.
8
Š
. If this
‹
appears in the display panel.
Š
.
.
Š
appears in the
˜
Press and hold the buttons for the front two hotplates at the
3.
same time for three seconds.
An audible signal sounds and the set power level is
displayed.
Set the power setting using
4.
3.0 corresponds to 3000 W. 4.5 corresponds to 4500 W.
Press and hold the buttons for the front two hotplates at the
5.
same time for three seconds.
The total power that is set is applied.
Switching off
Press the
button for the required hotplate.
μ
1.
Press the
button to switch off the powerboost function.
A
2.
Š
appears in the display panel.
Note: The maximum duration of the powerboost function is five
minutes. Once this time has elapsed, the hotplate switches
back to heat setting
Š
.
Childproof lock
The hob is equipped with a childproof lock function. This
function prevents the hob from being used by unauthorised
persons.
Notes
You can also use the childproof lock function as cleaning
■
protection. This enables you to clean the control panel
without changing the settings.
Before activating the childproof lock function, all hotplates
■
must be switched off.
Switching on
Switch on the hob.
1.
Press and hold the
and
A
2.
hotplate at the same time until an audible signal sounds.
Press the
button again for the front-right hotplate.
¸
3.
appears in the display panel.
–
Switching off
Switch on the hob.
1.
Press and hold the
A
and
2.
hotplate at the same time until an audible signal sounds.
Press the
button again.
A
3.
The
–
symbol disappears.
A
and
@
.
buttons for the front-right
¸
¸
buttons for the front-right
Advertisement
Chapters
Table of Contents
