Getting To Know Your Appliance; The Control Panel; The Hotplates; Residual Heat Indicator - Siemens EH611BE10J Instruction Manual

Getting to know your appliance

On page 2, you will find information on the dimensions and
power of the hotplates.

The control panel

Controls
Main switch
#
Hotplates
μ
Reduce or increase heat setting/time
A @

The hotplates

Hotplate
Single hotplate
$
Use only cookware suitable for induction cooking; see the section on suitable cookware.

Residual heat indicator

The hob has a residual heat indicator for each hotplate, which
indicates any hotplates which are hot or warm. Do not touch the
cooking surface while the residual heat indicator is displayed.
If the hob is switched off, the
as the hotplate is still warm.

Limiting the total power

This hob is equipped with a power limit. If the maximum power
is reached, no other hotplates can be switched on and the
power of the active hotplates cannot be increased any further.
In this case, an audible signal sounds and the display panel of
the hotplate concerned flashes.
The total power of the hob when delivered is limited to 3000 W
and can be increased to 4500 W.
The hob is divided into two groups. The two left- and right-hand
hotplates constitute one group each. The maximum power per
group is 3700 W.
Note: Please contact your electricity provider to establish
whether your appliance can be operated at 4500 W.
The total power of the appliance has a direct impact on the
operating characteristics:
Total power 3000 W:
You can use the following hotplates at the same time:
A large hotplate with the boost function and no other
■
hotplates.
Or a large hotplate on level 8 and two small hotplates on
■
level 1-7.
Or two small hotplates on level 9.
■
Always use cookware of a suitable size.
• indicator will stay lit for as long
Note
Always keep the controls dry. Moisture reduces their
effectiveness.
Display
Operating mode
‹
Heat settings
‚ - Š
Residual heat
•
Powerboost function
˜
No cookware or unsuitable cookware
μ
Cleaning protection
–
Total power 4500 W:
You can use the following hotplates at the same time:
A large hotplate with the boost function and one small
■
hotplate not in the same group on level 9.
Or a large hotplate with the boost function and one small
■
hotplate in the same group on level 7.
Or a large hotplate on level 9, a large hotplate on level 1-7
■
and a small hotplate on level 9.
Or two large hotplates on level 8 and two small hotplates on
■
level 1-7.
Or two large hotplates on level 1-7, a small hotplate on level
■
9 and a small hotplate on level 1-7.
Note: These examples are just a selection of possible
combinations.
7