Download Print this page
Aereco VCR-HD Technical And Maintenance Documentation

Aereco VCR-HD Technical And Maintenance Documentation

Advertisement

Quick Links

TECHNICAL AND MAINTENANCE DOCUMENTATION
VCR FANS
FOR AERECO MECHANICAL VENTILATION SYSTEMS
VCR-HD

Advertisement

loading
Need help?

Need help?

Do you have a question about the VCR-HD and is the answer not in the manual?

Questions and answers

Summary of Contents for Aereco VCR-HD

  • Page 1 TECHNICAL AND MAINTENANCE DOCUMENTATION VCR FANS FOR AERECO MECHANICAL VENTILATION SYSTEMS VCR-HD...
  • Page 3: Table Of Contents

    TABLE OF CONTENTS 1. General information 2. Fan installation 3. Fan models 4. Electrical specifications and connection 5. Start-up 6. Use 7. Transport and storage...
  • Page 4: General Information

    Integrated into the VCR fan, the HIGROdynamic automated system adapts the fan speed and adaptation to the network to the opening degree of the HIGRO® AERECO diffusers and grilles. This means that the parameters, can be used both electronic system lowers the fan speed at low flow volumes, adapting to the lower airflow in tall and short buildings.
  • Page 5: Fan Installation

    During installation and storage of the automated equipment, it must be protected against the ingress of water. · During all works connected with the fan service one should - use protective gloves, - use tools designed for maintenance work. 3. FAN MODELS VCR-31-HD · Automated system: Size: www.aereco.com...
  • Page 6: Electrical Specifications And Connection

    230 V AC/50Hz VCR-34 Connecting the HD automated system The power supply for the fan with a HD automated system should be connected as shown in the drawing. Switch Brown wire L Blue wire N Green-yellow wire PE Power cable www.aereco.com...
  • Page 7 4. The automated system is equipped with a switch 5. The switch-off button is located on the lower surface. After connecting the power supply, mount the cover of the automated system and tighten it with screws with 0.8Nm force. www.aereco.com...
  • Page 8: Start-Up

    · Incorrect start-up can lead to permanent damage of the fan. · The start-up can be carried out by the AERECO service with prior agreement. Start-up must be documented by an entry in the warranty Before applying voltage you have to check that: card.
  • Page 9: Use

    7. TRANSPORT AND STORAGE Before installation, the products must be protected from direct exposure to water, dirt and atmospheric conditions. They should be stored in a dry place. AERECO S.A. RESERVES THE RIGHT TO MAKE CHANGES TO THIS TECHNICAL MANUAL WITHOUT NOTICE. www.aereco.com...
  • Page 10 Aereco S.A. 62 rue de Lamirault – Collégien 77615 – Marne-la-Vallée Cedex 3 France Product name: Fans VCR-HD: - 31; 32; 33; 34 We declare the conformity of the product with the following directives, standards and documents: Directive 2014/30/EU Directive 2014/35/EU...
  • Page 11 NOTES...
  • Page 12 AERECO S.A. 62 rue de Lamirault - Collégien 77615 MARNE LA VALLEE CEDEX 3 FRANCE www.aereco.com...

This manual is also suitable for:

Vcr-31Vcr-32Vcr-33Vcr-34