Download Print this page

Marantz SR6013 Owner's Manual page 254

Hide thumbs Also See for SR6013:

Advertisement

Contents
Connections
No sound comes out
No sound comes out of speakers.
Check the connections for all devices. (v p. 37)
0
Insert connection cables all the way in.
0
Check that input connectors and output connectors are not reversely connected.
0
Check cables for damage.
0
Check that speaker cables are properly connected. Check that cable core wires come in contact with the metal part on speaker terminals. (v p. 37)
0
Securely tighten the speaker terminals. Check speaker terminals for looseness. (v p. 37)
0
Check that a proper input source is selected. (v p. 84)
0
Adjust the volume. (v p. 85)
0
Cancel the mute mode. (v p. 85)
0
Check the digital audio input connector setting. (v p. 193)
0
Check the digital audio output setting on the connected device. On some devices, the digital audio output is set to off by default.
0
When a headphone is plugged into the PHONES jack on the main unit, sound is not output from the speaker terminal and PRE OUT connector.
0
No sound comes out when using the DVI-D connection.
When this unit is connected to a device equipped with a DVI-D connector, no sound is output. Make a separate audio connection.
0
No sound comes out of a TV that is connected via HDMI.
Audio signals input to 7.1CH IN connectors on this unit cannot be output to the TV.
0
Front panel
Display
Playback
Settings
254
Rear panel
Tips
Remote
Index
Appendix

Advertisement

loading