Advertisement
Contents
Connections
o WPS Router
Use a WPS-compatible router to connect using the push button
method.
1. Select "Push Button" on the TV screen.
2. Switch to the WPS mode by pressing the WPS button of the router
you wish to connect to.
The time for pressing the button varies depending on the router.
0
3. Select "Connect" on the TV screen within 2 minutes.
o Manual
Enter the name (SSID) and password of the network you wish to
connect to.
1. Set the following items.
SSID:
Security:
Password:
2. Select "Connect" at the end of the setting.
Front panel
Display
Playback
Input the name of the wireless network
(SSID).
Select the encryption method according
to the encryption setting of the access
point you are using.
Input the password.
Rear panel
Settings
0 The wireless LAN (Wi-Fi) settings of this unit can also be configured from a PC or
tablet that supports wireless LAN connection.
1. Press and hold the ZONE2 SOURCE and TUNER PRESET CH + buttons on
the main unit for at least 3 seconds when the power of the unit is on.
2. Connect the wireless LAN of the PC or tablet used to "Marantz SR6013" when
the message "Connect your Wi-Fi device to Wi-Fi network called "Marantz
SR6013"." appears in the display.
3. Start up the browser and enter "192.168.1.16/Settings/" in the URL.
4. Use the browser to enter the settings, select "Connect" and then exit the
settings.
0 The Default key of this unit is fixed at "1". Set Default key of the router to "1" to use.
226
Remote
Tips
Appendix
Index
Advertisement
