Desa GS38 Assembly Instructions

For use with vi33nr/pr vent-free fireplace inserts only

Hide thumbs Also See for GS38:

Download this manual

For more information, visit www.desatech.com

IMPORTANT: Read entire instruction sheet before assembling or installing Black Fireplace Surround

Kit. This fireplace surround is only approved for use with heater Models VI33NR and VI33PR natural and

propane/LP gas. Do not use fireplace surround with any other product.

Save this manual for future reference.

GS38 AND GS43 BLACK

FIREPLACE SURROUND

Assembly Instructions

For Use With VI33NR/PR Vent-Free

Fireplace Inserts Only

Installed Vent-Free Insert and Surround Kit

Need help?

Do you have a question about the GS38 and is the answer not in the manual?

Page 1 GS38 AND GS43 BLACK FIREPLACE SURROUND Assembly Instructions For more information, visit www.desatech.com For more information, visit www.desatech.com For Use With VI33NR/PR Vent-Free Fireplace Inserts Only Installed Vent-Free Insert and Surround Kit IMPORTANT: Read entire instruction sheet before assembling or installing Black Fireplace Surround Kit.
Page 2 • #2 Phillips Screwdriver • 5/16" Socket or Nut Driver If any of these pieces are missing or damaged, contact the dealer where you purchased this kit or DESA Heating Products at 1-866-672-6040. Screen Mounting CAUTION: Close fireplace damper securely be- Shoulder fore installing heater insert.
Page 3 6. Align screw holes in side panels with holes in top panel (see 13. Slide other end of adjusting plate/shim in slot on mitered edge Figure 5). Insert and tighten #10 Phillips screws. of side surround trim (see Figure 6). 7.
Page 4 2701 Industrial Drive P.O. Box 90004 Bowling Green, Kentucky 42102-9004 Technical Service Department 1-866-672-6040 www.desatech.com 105573 01 NOT A UPC 105573-01 Rev. B 04/03 For more information, visit www.desatech.com For more information, visit www.desatech.com 105573-01B...

Gs43