Chapter 5. Configuration Menu
Unit
46
DTE Timing
The DTE is the source of timing. The ESU LT uses the
incoming DTE clock to determine the transmission timing.
This is typically used in applications such as limited distance
line drivers, where it is necessary to have the DTE as the
primary clock source. See Figure 5-5.
The U
submenu is used to change control port and alarm
NIT
options, and to select the management channel.
Follow standard operating procedure to access the U
Menu items. See Figure 5-6.
ESU LT User Manual
Figure 5-5. DTE Clock Source
Figure 5-6. Unit Submenu
NIT
61200410L1-1B