Table of Contents
Advertisement
Cfg. Rmt. Unit
Cfg. Rmt. Unit causes the ISU 2x64 to place a call to a remote ISU
for configuration. The user is prompted for the number to dial
and the password for accessing the remote unit. After the call is
placed, the local unit sends the entered password to the remote
unit. If the password is correct, the remote unit confirms the pass-
word and configuration is allowed. If the remote unit has no pass-
word defined, press Enter at the prompt.
Set Password
Set Password prompts the user to enter a six digit numeric code
that musts be supplied when a remote configuration call is re-
ceived. This password is the same as the password for front panel
keypad locking. The default state is nothing entered in the pass-
word option.
Lpbk remote 1B
Lpbk remote 1B causes the ISU 2x64 to make a call to a remote ISU
and place the remote ISU into a 1B-channel loopback. When the
remoted unit is looped back, the local unit will send a test pattern
(2047) to the remote unit and verify that the test pattern comes
back uncorrupted. The user is prompted for the number to dial.
Negotiation progress is displayed while the loopback call is in
progress. Total bytes and Error bytes are displayed upon connec-
tion success. The Cancel key disconnects the call at any time.
Lpbk remote 2B
Lpbk remote 2B causes the ISU 2x64 to make a call to a remote ISU
and place the remote ISU into a 2B-channel loopback. When the
remoted unit is looped back, the local unit will send a test pattern
(2047) to the remote unit and verify that the test pattern comes
back uncorrupted. The user is prompted for the number to dial.
Negotiation progress is displayed while the loopback call is in
progress. Total bytes and Error bytes are displayed upon connec-
tion success. The Cancel key disconnects the call at any time.
61200051L1-1D
Chapter 9. Security and Remote Configuration
ISU 2x64 Dual Port ISDN Service Unit User Manual
75
Advertisement
Table of Contents
