Phonic MAX Series User Manual page 9

STEREO
STEREO mode is the most frequently used mode
among the three. Each channel is independent of
the other, carrying its own input signal, with its own
gain control. Stereo mode comes in left and right
channels (See Figure 5).
A) When one channel is assigned for left channel,
make sure the other channel is assigned for
PHONIC CORPORATION
the right.
B) User can use the unit for mono output, with
one as main and the other as monitor.
C) This power amplifier can also be used for bi-
amplification. One channel for driving low fre-
quencies while the other for driving high frequen-
cies.
MAX SERIES USER' S MANUAL
OPERATION
Page 9