Table of Contents
Advertisement
Operate
4.1
Aligning the SIMATIC MV326 optical handheld reader
Proceed as follows to align the reader:
1. Press a button or the trigger button of the optical handheld reader.
2. Keep pressing the button or trigger button.
The two blue beams sent out by the optical handheld reader are used for targeting.
3. The blue beams must be directed to the center of the barcode.
If the barcode is in the viewing field of the device and at the optimum read distance
(approximately 10 cm from the device), the barcode will be read automatically.
Result: The optical handheld reader beeps and vibrates and the read confirmation LED flashes
green.
SIMATIC MV326
Operating Instructions, 08/2021, C79000-G8976-C644-02
4
19
Advertisement
Table of Contents
