Charging The Optical Handheld Reader - Siemens SIMATIC MV326 Operating Instructions Manual

Optical identification
Table of Contents

Advertisement

Commissioning

3.2 Charging the optical handheld reader

3.2
Charging the optical handheld reader
Charge the batteries before turning on the device for the first time
In the delivery state, the batteries are approximately 50% charged. Fully charge the batteries
before turning on the device for the first time.
The charging time for a completely discharged battery with the charging station and the USB
cable is about 4 hours.
Charging the optical handheld reader
Proceed as follows to charge the reader:
1. Connect the USB cable of the charging station to the USB port of the computer.
2. Remove the protective foil on the reader window.
3. Place the device into the charging station ①.
14
Charging station
Operating Instructions, 08/2021, C79000-G8976-C644-02
SIMATIC MV326

Advertisement

Table of Contents
loading

This manual is also suitable for:

6gf3326-0ht01

Table of Contents