SRM High Performance Ergometer Manual page 19

SRM Ergometer Manual
 By pressing the Read Settings button, the zero offset will be
displayed in the white background field.
 Press the Write Settings button, so that the zero offset will be
saved.
Circumference
The circumference only influence the displayed speed and is not important
for the calculation of the data. We recommend to insert a value of 1.000
mm.
The following points show the current state of the ergometer. They are
important for the identification and the service.
Firmware
The firmware can be updated if you drop the latest "SRM Firmware
Image" file (*.sfi) in the box on the lower left corner of the screen: Drop
file here to import.
The current firmware incl. date is displayed (e.g. V 1.0.8, 20.06.2016).
Hardware
Product Code
Serial Number
Operation time
Read Settings
Read the current settings of the ergometer incl. the zero offset and the
Slope.
Write Settings
Here it is possible to insert the slope and to save/to write it for the correct
data. Please note that the must be correspond to the slope of the
PowerMeter.
19