Table of Contents
Advertisement
USEFUL HELP
4-1 HOW TO UPDATE BIOS
STEP 1. Prepare
a boot
click OK)
STEP 2. Download upgrade tools and the latest BIOS files of the motherboard from official
website and then make a copy of it to your bootable
decompressing these files
STEP 3. Insert the disk into A: ,start your computer and then type in
"A:\xxxxxx.BAT"(xxxxxxx being the file name of the latest BIOS )
STEP 4. Type Enter to update and flash the BIOS. The system will restart automatically
when BIOS is upgraded.
4-2 Trouble Shooting
Problem
No power to the system to the all power
light don't illuminate, fan inside power
supply doesn't turn on.
System inoperative. Keyboard lights are
on , power indicator lights are lit, and hard
drive is spinning.
System doesn't boot from hard disk drive,
can be booted from optical drive.
System only boots from optical
drive .Hard disk can be read and
applications can be used but booting from
hard disk is impossible.
Screen message says "Invalid
Configuration" or "CMOS Failure"
Can not boot system after installing second
hard drive.
Chapter 4
disc. (You may make one by click START click RUN type SYS A:
floppy
Solution
1. Make sure power cable is security
plugged in. 2. Replace cable. 3. Contact
technical support.
Using ever pressure on both ends of the
DIMM , press down firmly until the
module snaps into places.
1. Check cable running from disk to disk
controller board. .Make sure both ends are
securely plugged in, check the drive type
in the standard CMOS setup. 2. Backing
up the hard drive is extremely
important .All hard disks are capable of
breaking down at any time.
1. Back up date and applications files. 2.
Reformat the hard drive. Reinstall
applications and date using backup disks.
Review system 's equipment .Make sure
correct information on is in setup.
1. Set master /slave jumpers correctly. 2.
Run SETUP program and select correct
drive types. Call the drive manufacture for
compatibility with other drives.
14
disk after
Advertisement
Table of Contents
