Adjustments And Settings; Stitch Length; Cutting Width - JUKI MO-204D Instruction Manual

Adjustments and settings

MO-214D
MO-204D
A

Stitch length

It can be adjusted while sewing. The stitch length is infinitely variable
from 1-4mm. Most overlock work is done with a basic setting of 2.5mm.
Stitch length
Open the cloth plate, loosen the knob and adjust to the desired length.
Tighten the knob and close the cloth plate.
The stitch length is infinitely variable from 1 - 4 mm.
Most overlock work is done with a basic setting of 2 - 3 mm.

Cutting width

• Open the cloth plate. Raise presser foot.
• Push upper knife to the right and turn cutting width dial in the direc-
• Close cloth plate cover and lower presser foot.
Cutting width:
1 = 3 - 5 mm seam width
2 = 4 - 6 mm seam width
3 = 5 - 7 mm seam width
The position of the lower knife determines the width of the seam.
Reduce cutting width (knife moves to the left) if the edges of the fabrics
B
curl up (A).
Increase the cutting width (knife moves to the right) if the loops are too
loose (B).
Switch the machine off (Power switch to "0").
• Switch the machine off (Power switch to "0").
tion desired.
20