Philips 32PFL3901 User Manual page 28

Y Y ou may adjust picture quality and enhancement settings using Pixel
Plus HD and Advanced settings sub menus.
Auto picture Dynamic contrast
Backlight Color enhancement
Contrast Black stretch
Brightness 120 PMR
Color Noise reduction
Tint MPEG artifact reduction
Sharpness
Pixel Plus HD
Advanced settings
Picture format
Mode selection
to Select the desired setting, then press OK
Dynamic
(Off, Minimum, Medium and Maximum)
contrast
to set color enhancement to Off
Off
Color
enhancement
On to make colors more vivid and bright
Black to Select the desired setting, then press OK
stretch (Off, Minimum, Medium and Maximum)
Off to Set 120 PMR to Off
120 PMR
On to Make the Video appear smoother
Noise to Select the desired setting, then press OK
(Off, Minimum, Medium and Maximum)
reduction
MPEG
to Select the desired setting, then press OK
artifact
(Off, Minimum, Medium and Maximum)
reduction
Auto picture Color alignment
Backlight Custom color management
Contrast Gamma
Brightness Film mode
Color
Tint
Sharpness
Pixel Plus HD
Advanced settings
Picture format
Mode selection
to set the color temperature to Personal,
Cool, Normal and Warm.
Mode
When you adjust the following settings,
Personal will be set automatically.
to Decrease Red
Red gain
Contrast
to Decrease Green
Green gain
Color
Contrast
alignment
to Decrease Blue
Blue gain
Contrast
to Decrease Red
Red offset
Brightness
to Decrease Green
Green offset
Brightness
to Decrease Blue
Blue offset
Brightness
Off
Minimum
Medium
Maximum
Mode
Red gain
Green gain
Blue gain
Red offset
Green offset
Blue offset
Cursor Cursor
to Increase Red
Contrast
to Increase Green
Contrast
to Increase Blue
Contrast
to Increase Red
Brightness
to Increase Green
Brightness
to Increase Blue
Brightness
to Select the desired setting, then press OK
(Red, Yellow, Green, Cyan, Blue and Magenta)
to rotate only
Tint selected color tint in
Custom color
clockwise direction
management
to decrease color
with only selected
Saturation
color
to decrease
Brightness brightness with only
selected color
to Select the desired setting, then press OK
Gamma (Very Dark Room, Dark Room, Normal, Bright Room and
Very Bright Room)
to set film mode to Off
Off
Film mode
to optimize the picture recorded by the
Auto
original film
Note(s)
•
Mode selection is available only if
–the external Input modes are selected HDMI 1 or HDMI 2.
–the connected HDMI device is outputting a video signal.
28
Cursor Cursor
to rotate only
selected color tint in
counterclockwise
direction
to increase color
with only selected
color
to increase
brightness with only
selected color
Continued on next page.
.
English